If you want a high-pressure fan to operate normally for a long time, you must pay attention to daily maintenance. This is the most direct way to increase the life span. Of course, the correct use of it is a major premise.
So, what are the issues that should be paid attention to? Pay attention to maintaining the impeller. The impeller is the first detail to be checked when Ober fans are first installed. The inspection of the impeller is not done all at once, and detailed inspections are required many times.
The impeller is a place that needs maintenance for a long time. Once it is damaged or cracked, it must be repaired in time. If it cannot be repaired, contact the manufacturer for replacement.
Even small cracks or dust should be cleaned up in time.
We want to ensure that the impeller is clean and clean at all times. When you have free time, wipe it slowly with a steel wire ball, because once there is a lot of dust on it, it will definitely be too late for you to wipe it.
Also, pay attention to the running time. The longer the running time, the greater the probability of problems with this impeller.
There is too much dust, and everything is glued to this, the impeller is out of balance, the leaves do not rotate, and only replacement is needed later, and the cost will not be too low. Of course, we need to ensure that the impeller can always be in a normal environment, clean it at any time, and maintain the balance of this action.
If there is a manufacturer with economic strength, it can be equipped with a balancer, and pay attention to the problem of the balancer at any time when operating on site. The screws should be tightened a little bit. If the impeller is unbalanced, it is actually related to the screws.
Pay attention to maintaining the bearings. The maintenance of this bearing is actually a problem of lubrication. If the case is leaking, the screws must be rectified first. If the screws cannot solve the problem, then pay attention to the sealing problem.
In fact, the lubricating oil of Ober fans should be replaced. It is like a car problem. If there is a problem with the lubricating oil, it must be replaced regularly.
The replacement time is generally considered once every 6 months. Pay attention to the time of the first use. Generally, you should pay attention to it after almost 200 hours of use for the first time, and pay attention to the interval between the second oil change.
The oil can be changed in about two months. Make a record of the oil change time. You can check it every week. If the lubricating oil has not changed, then pay attention to whether it has deteriorated.
The lubricating oil of the fan should also pay attention to certain regulations. Not all lubricating oil can be used. In addition, before adding new lubricating oil, you must pour out all the previous ones. Never mix two different lubricating oils. It is also prone to failure.
Bearing problems also pay attention to replacement matters. If you are replacing the bearings, pay attention to cleaning issues.
First, the box must be clean, and the temperature must be around 80 degrees. Don't force the assembly, otherwise the machine itself will be damaged later.
About the maintenance of supporting equipment. There are many supporting equipment for the fan, and the supporting equipment has its own instructions for use.
|
