Central feeding system central conveying system

Central feeding system| RSS

central feeding system


Design diagram



Industry Application

Cost budget


application solutions

About us

Welcome to join the central feeding system website (central feeding system is also called central feeding system, automatic feeding system, centralized feeding system, central conveyor system)! This is a global central feeding system manufacturer, providing a more comprehensive central feeding system information exchange platform website for machinery and equipment products, technology, design, cost budget, entire factory planning, solutions, etc.! Feasible design solutions can reduce more costs for enterprises!

Dehumidification and drying system for PET

  Dehumidification and drying system for PET Details description
product name:Dehumidification and drying system for PET
release time:2020-09-04
weight :600
unit weight:kg
patent:Drying Control
Producing country:CHINA
simple description:Dehumidifying dryer for plastic material
Product alias:
  Dehumidification and drying system for PET Product introduction

Dehumidification and drying system for PET parameter

Model HCF-400 400
Dryer Hopper Capacity (KG) 400
Heat Protection Material Fiberglass+Staninless Steel
Dry-Air Dew point -35℃  to -45℃
Temperature (℃) 80-180
Air Flow (m^3/h) 400
Blower Power (KW) 5.5
Regeneration Blower (KW) 0.75
Drying Heater (KW) 20
Regeneration Heater (KW) 7.2
Pipe Sizes Drying (mn) 76
Cooling (lnch) 3/4"
Regeneration (mn) 51
Conveying Blower (KW) 2
Conveying Distance (m) Stage 1 6-10
Stage 2 6-10
Hose Size (Inch) 1.5
Sensor Hopper Capacity (L) 7.5
Vacuum Hopper Capacity (L) 7.5
Dimension LxWxH (cm) 150×130×280
Approx.Net Weight (KG) 600
Remark: Compressed air Pressure must more than 0.4MPa,air flow more than 15L/H;
We reserve the right to change spencifications without prior notice.

Product alias:

Dehumidification and drying system for PET Equipment principle

Product alias:

Dehumidification and drying system for PET application

Product alias:

Dehumidification and drying system for PET Precautions

1, please carry out electrical construction in accordance with the "Electrical Equipment Standards", "Inner Line Regulations" and this operating manual.
2, please do not use the power supply other than that specified.
3, please complete the specified grounding project. (Yellow power cord)
4, please fasten the connector and connecting terminal of the machine body and measuring wire.
5, before the line test, the power must be cut off, and the voltage will be measured with a multimeter after 10 minutes to ensure safety before the test.
6, the door of the control box must not be opened at will during the power-on process.
7, it is forbidden to touch the machine body, control part and other accessories with wet hands.

Product alias:

Central feeding system

centralized conveying system

central material feeding system

Dehumidification dryer gravimetric blender plastic granules mixing machine
Plastic dehumidifying dryer gravimetric blender plastic granules mixing machine
Links:  google plastic dryer Dehumidifying Dryer gravimetric blender Central feeding system