What are the reasons and solutions for the noise generated by the centralized feeding system
The centralized feeding system can integrate a variety of raw materials for centralized dehumidification and drying, color matching, and enclosed transportation. The structural design of one pipe per machine effectively avoids the occurrence of moisture regain and blockage of the raw materials, which can ensure the stable operation of the system, improve work efficiency, and ensure product quality. If there is noise in the centralized feeding system, it will not only cause irritability of the staff, but also cause the system to fail to work normally. In order to effectively avoid this situation, today I will explain to you the reasons and solutions for the noise generated by the centralized feeding system.
1. Generally, if there is a lack of hydraulic oil in the oil tank of the centralized feeding system, air will enter the oil pump or the oil filter will be clogged with dirt, causing the oil to generate bubbles and discharge and hit the blades, thereby causing noise. At this time, we need to check whether the amount of oil is enough, and if it is not enough, add it to avoid air ingress.
2. The viscosity of hydraulic oil is too high, resulting in poor flow and increased resistance. It is necessary to replace the hydraulic oil suitable for the application of the feeding system.
3. If the oil pump or motor fails, the bearing or blade damage will cause errors in the concentricity of the coupling and cause noise. Need to readjust the concentricity or replace with intact parts.
4. The centralized feeding system can work, but the directional valve response fails, such as valve core wear, internal leakage, burr clogging, insensitive movement, and solenoid valve failure due to lack of current may cause noise. We need to clean the valve core regularly to ensure that it is clean and free of blockages, damaged parts need to be replaced in time, and the current supply must be guaranteed.
5. The mechanical bearings are worn or the machine lacks lubricating oil or the parts are loose, causing frictional noise during operation. The parts need to be tightened or replaced, and necessary lubricants added.
Regarding the reasons and solutions for the noise generated by the centralized feeding system, I will introduce them here today. In our daily life, we can regularly check and repair the centralized feeding system, and perform maintenance work to avoid the centralized feeding system from malfunctioning. noise.
|
