The existence of the central feeding system effectively reduces the labor cost of industrial production and improves production efficiency. However, some users of the central feeding system lack the operating experience of the central feeding system and therefore use the wrong operation method, which not only reduces the production efficiency, but also threatens the service life of the central feeding system. Next, I will introduce the correct operation method of the central feeding system for everyone, let's see if you have done something wrong.
Correct operation method of central feeding system
System name: Central feeding system
1. Method/Step
The safety device of the central feeding system must be kept in good condition, and the safety device must not be invalidated to save trouble. In daily use, it is necessary to pay attention to observation and replace or repair the worn out central feeding system components in time to extend its service life.
2. Correct operation method of central feeding system
Before starting, the driving wheel should be moved one or two laps manually. After confirming that the movement is flexible, the central feeding system should be opened for operation, and the feeding should be performed after the central feeding system is operating normally. When the central feeding system is used up, it needs to stop the operation. It should be noted that before stopping the central feeding system, the feeding should be stopped and the materials in the machine should be drained, and then the motor power supply should be cut off.
3. The correct operation method of the central feeding system
Check whether the particle size of the crushed product meets the operating requirements of the central feeding system. If there are too many particles exceeding the specified size, the cause should be found (such as too large gap in the screen, wide discharge port, hammer wear, etc.), and take appropriate measures Measures to deal with the problem. In addition, it is necessary to maintain uniform feeding of products from the central feeding system to prevent overload. Strictly prevent unbreakable objects such as metal and wood from falling into the machine. When it cannot be crushed, the feed moisture cannot be too high; when wet crushing, proper water is needed to prevent blockage due to insufficient flushing water and reduce production capacity.
4. Correct operation method of central feeding system
Pay attention to the temperature of the bearing during operation, keep the bearing in a good lubrication state, and pay attention to whether there is abnormal sound and vibration. When an abnormal situation is found, the first thing to do is to stop the machine and check whether it is stuck by something that is not easily broken, or the central feeding system is damaged.
Correct operation method of central feeding system
After the operation of the central feeding system every day, check whether the fastening bolts are firm and the degree of wear of the easily worn parts. If you pay more attention in daily use, you can make the central feeding system more durable.
5. Matters needing attention
According to the correct usage method described above, find out the errors or omissions, and then correct them.
|
