Technology	Design diagram	Video
Accessories	Industry Application	Cost budget
Equipment	application solutions	About us

Welcome to join the central feeding system website (central feeding system is also called central feeding system, automatic feeding system, centralized feeding system, central conveyor system)! This is a global central feeding system manufacturer, providing a more comprehensive central feeding system information exchange platform website for machinery and equipment products, technology, design, cost budget, entire factory planning, solutions, etc.! Feasible design solutions can reduce more costs for enterprises!

central feeding system

Advantages of blown film central feeding system

source：Central feeding system
Author：Central feeding system
time：2020-09-04 10:13:13

Advantages of central feeding system:
1. Centralized drying and centralized dehumidification
① Save electricity bills. Assuming that the current customer has 10 injection molding machines, and 10 units of 100Kg are equipped with one kind of raw material
The total electricity consumption of the dryer is 59.5Kw per hour. If a 1000Kg dryer is designed for central feeding, the total electricity consumption is 30Kw per hour, which saves 29.5Kw per hour, which can save 259128Kw per year.
② Save water. Assuming that the customer has 5 sets of 100Kg dryers with 5 sets of 80 dehumidifiers,
5 sets of cooling water are used. If centralized dehumidification is used, a 400 dehumidifier can be used, so that nearly 4 sets of cooling water can be saved.
③Environment improvement.
④The temperature in the workshop is reduced. Assuming that the customer has 10 100Kg dryers on the injection molding machine, each!

The large amount of heat that the dryer can release, because the heat cannot be quickly dissipated,
Cause the temperature of the entire workshop to rise; if the central control system is used for centralized drying and isolation from the injection molding workshop, the raw materials are transported to each injection molding machine with a closed pipeline, so that each drying machine can be dried.
The 120 cubic meters of hot air per hour emitted by the dryer is concentrated to the outside.
2. Centralized feeding
① Reduce labor. Assuming that the customer has 20 injection molding machines, 5 people are required to be responsible for the feeding operation,
Then if you use central feeding, only 1 to 2 people can complete the operation.
② The workshop is clean and tidy.
③ It saves 2～3℅ raw materials than manual operation. Fully automatic closed feeding system reduces
Manual participation, the use of storage barrels and storage bins, compared with manual operation, reduces the waste of raw materials.
④The raw materials are conveyed in a closed, without dust pollution. After the raw material is sent to the storage tank, the motor will
The material is pumped from the barrel through the barrel to the injection molding machine table, so that the material will not be dusted during the conveying process.
Dust pollution.
3. Centralized control:
① Easy to operate.
② The grade is improved.
③Automation system. The main data requirements of the central feeding system:
1) Know the types of customers' raw materials and whether they need to be dried or dehumidified.
2) Understand the customer's raw material transportation distance and raw material transportation volume.
3) Know what raw materials are used in which machines of the customer. Whether it is necessary to equip a distributor to switch raw materials at will.
4) Knowing the distance and delivery volume can calculate the size of the motor and the size of the pipeline. experience
Optional.
5) Understand the types of raw materials used in each injection molding machine, you can know how to equip the cut valve to
And how to control the PLC.
6) Knowing the customer's layout and watching on-site is very helpful for on-site construction.