With the rapid development of science and technology, a broader development space has been created for the plastic raw material processing industry. Therefore, improving the feeding efficiency and reducing various consumption are important factors that determine the development of the enterprise. The editor will introduce to you the design of the automatic feeding system and conveying device.
Design of automatic centralized feeding system and conveying device:
According to the manufacturer of the automatic feeding system, the working principle of the automatic feeding system is that the protective door of the vertical machining center is opened, the pallet switch is positioned, and the fixture filled with workpieces is placed in the processing area for processing. So when the machine tool is processing the first side of the workpiece, the automatic feeding equipment starts to install more blank parts on the second empty pallet fixture. When the first surface of the end of the blank is processed, the pallet changes its position again. The automatic feeding equipment unloads the processed workpiece on the first side from the first pallet, and then transfers it to the "turnover workstation" in the automatic equipment protective cover, and finally installs it on the workstation from the inner panel, and Through this workstation, the workpiece is effectively turned over, so that the unprocessed surface faces upward, and is mounted on the fixture again for clamping.
Before unloading the processed parts by the automatic feeding mechanical equipment, a high-speed compressed air nozzle installed on the clamp base of the automatic feeding equipment is used to blow off the chips left on the entire fixture, because in the process of removing the parts, etc. , Some chips may fall into one or more cavities, which will affect the correct positioning of the next batch of workpieces. It takes about 30 minutes from the installation of the rough part to the first side processing to the completion of all parts processing until the finished product is transferred to the next area.
The lower part of the automatic feeding system device is provided with a material tray input mechanism. The end of the material tray input mechanism is connected with a material tray automatic lifting mechanism. The upper end of the tray automatic lifting mechanism is connected with the pallet mechanism and is located on the material tray positioning and empty tray removal mechanism An empty tray lifting and stacking mechanism is provided at one end far away from the pallet mechanism. The use of this device is no longer restricted by the shape of the material, and is suitable for various automatic assembly production lines, which truly realizes automation, and improves the accuracy of feeding and reduces the labor intensity of people.
From the brief description of the design of the automatic feeding system and the conveying device, we can know that the convenience of the automatic feeding system is that these tasks do not require too much manual operation, but repeat operations like a robot, so this automatic Feeding equipment is also developing relatively fast in the industrial industry.
|
