Technology	Design diagram	Video
Accessories	Industry Application	Cost budget
Equipment	application solutions	About us

Welcome to join the central feeding system website (central feeding system is also called central feeding system, automatic feeding system, centralized feeding system, central conveyor system)! This is a global central feeding system manufacturer, providing a more comprehensive central feeding system information exchange platform website for machinery and equipment products, technology, design, cost budget, entire factory planning, solutions, etc.! Feasible design solutions can reduce more costs for enterprises!

central feeding system

What should we do if the water storage in the desiccant dryer is too much

source：Central feeding system
Author：Central feeding system
time：2020-09-03 15:13:03

Dehumidification dryers are very safe and reliable. The rapid development of dehumidification dryers in the current era makes plastic production automation already a widely used advanced science and technology.

The water storage capacity in the desiccant dryer is too full. To avoid overflowing and contaminating the ground, please unplug the power cord first, and then pour out the water in the water storage bucket when the machine body must be moved during operation. After moving, the desiccant dryer is best left statically for four to six hours before starting to use it. Because the compressor pipeline in the dehumidifier contains cold coal, it must take four to six hours to return the cold coal to its original position after being moved. Clean the air filter regularly to maintain the dehumidification and dust removal efficiency and life of the machine.

The desiccant dryer should be cleaned frequently and kept clean. The desiccant dryer should be placed in the center of the room. The air inlet and outlet of the refrigerated dryer should not be blocked by obstructions, and the air filter should be cleaned. The air inlet and outlet should not be blocked by obstructions, and the air filter should be cleaned. When the ambient temperature is lower than 15℃, the water droplets attached to the evaporator surface will freeze and the dehumidifier effect will be weakened. If the ambient temperature exceeds 40℃, the pressure in the system will increase and the compressor will overload. At this time, the overload protector The circuit should be cut off, otherwise the compressor motor will be damaged. So the best temperature range of dehumidifier is 15℃～40℃.