Technology	Design diagram	Video
Accessories	Industry Application	Cost budget
Equipment	application solutions	About us

Welcome to join the central feeding system website (central feeding system is also called central feeding system, automatic feeding system, centralized feeding system, central conveyor system)! This is a global central feeding system manufacturer, providing a more comprehensive central feeding system information exchange platform website for machinery and equipment products, technology, design, cost budget, entire factory planning, solutions, etc.! Feasible design solutions can reduce more costs for enterprises!

central feeding system

Causes and preventive measures of pipeline blockage in central feeding system

source：Central feeding system
Author：Central feeding system
time：2020-08-27 10:42:26

Causes and preventive measures of pipeline blockage in central feeding system

The pipeline is an indispensable connecting device for the central feeding system. If it is not well laid out, the impact will be particularly great. Therefore, the basic layout principles must be followed to ensure efficient and smooth production. During the operation of the central feeding system, pipeline blockages often occur. Of course, there are many reasons. It is necessary for manufacturers to discover these possible situations and take precautions to ensure the stable operation of the central feeding system.

1. Consider the rationality of the configuration of the entire production equipment and conveying system to facilitate production.

2. The pipeline installation, overhaul and maintenance of the central feeding system should be convenient.

3. The conveying pipe should be as short as possible under the premise of meeting the conveying requirements.

4. The number of elbows in the central feeding system should be as few as possible, especially elbows that transition from horizontal to vertical should be used as few as possible.

5. The horizontal tube should not be too long, otherwise it will easily cause adverse consequences.

1. Reasons for the blockage of the central feeding system pipeline

1. Too much dust in the crushed material.

2. The pulsation dust collector is full of dust and not cleaned up in time, causing the vacuum tube to be blocked.

2. Prevention and Solution of Pipeline Blockage of Central Feeding System

1. The preventive measure is to provide relevant operators with maintenance training.

2. It is recommended that the pulsation dust collector should be cleaned 4 times or more per shift.

3. It is recommended to add a dust filter collection device to reduce the working load of the pulsating dust collector. Precautions are tested in strict accordance with factory workshop standards.