| Plastic Dehumidifying Dryer for PLA Details description |
 |
| product name：Plastic Dehumidifying Dryer for PLA |
| release time:2020-09-04 |
| Numbering:HCF-8050 |
| Brand:wtobtb |
| Price:￥Various |
| weight :310 |
| unit weight:KG |
manufacturer:HENGJU |
| patent:Drying Control |
| Producing country:CHINA |
| simple description:The dehumidifying dryer combine a dehumidifying and drying system in a single unit.They have many applications in processing plastic materials such as PA,PC,PBT ,PET,etc. honeycomb rotors ,under ideal conditions,can supply dehumidified dry air with a dew-point down to -40 and -50. All models feature honeycomb dehumidifiers with built-in process heater,and insulated drying hopper. ,This is a device used to dehumidifying plastic resin to achieve drying.For example,
POM,ABS,TPE,PAL,ABS,CAB,EVA(2),EVOH,LM(4),
LCP,PA11,PA6.46.6,PAI,PAR,PBT,PC,PC/ABS,PC/PBT,
PE.HDEPE,LDPE black3%,PE.HDEPE.LDPE black40%,
PEEK,PE(1), PEN,PES,PET,PETG,PI,PMMA,POM,PP,PPO,
PPS,PS,GPPS.EPS.HIPS,PSU, PIT,PUR,PVC,SAN,SB,TPE,
TPE,TPO,TPU,Dehumidifier dryerand other plastic resins
must be dehumidified and dried during the production process to improve the quality of the finished product. |
| Product alias:Plastic Dehumidifying Dryer for PLA,Hopper Dryer,Plastic Dehumidifying Dryer for PLA |
|
| Plastic Dehumidifying Dryer for PLA Product introduction |
|
Plastic Dehumidifying Dryer for PLA parameter
Hopper Dryer
| Model |
HCF-80-50 |
| Dryer Hopper |
Capacity (KG) |
50 |
| Heat Protection Material |
Fiberglass+Staninless Steel |
| Dry-Air Dew point |
-35℃ to -45℃ |
| Temperature (℃) |
80-180 |
| Air Flow (m^3/h) |
80 |
| Blower Power (KW) |
0.75 |
| Regeneration Blower (KW) |
0.25 |
| Drying Heater (KW) |
3.9 |
| Regeneration Heater (KW) |
3.8 |
| Pipe Sizes |
Drying (mn) |
51 |
| Cooling (lnch) |
3/4" |
| Regeneration (mn) |
38 |
| Conveying Blower (KW) |
0.75 |
| Conveying Distance (m) |
Stage 1 |
6-10 |
| Stage 2 |
6-10 |
| Hose Size (Inch) |
1.5 |
| Sensor Hopper Capacity (L) |
7.5 |
| Vacuum Hopper Capacity (L) |
7.5 |
| Dimension LxWxH (cm) |
100×87×180 |
| Approx.Net Weight (KG) |
310 |
| |
|
|
Remark: Compressed air Pressure must more than 0.4MPa,air flow more than 15L/H;
We reserve the right to change spencifications without prior notice. |
Product alias:Plastic Dehumidifying Dryer for PLA,Hopper Dryer,Plastic Dehumidifying Dryer for PLA |
Plastic Dehumidifying Dryer for PLA Equipment principle
Hopper Dryer 
Product alias:Plastic Dehumidifying Dryer for PLA,Hopper Dryer,Plastic Dehumidifying Dryer for PLA |
Plastic Dehumidifying Dryer for PLA application
This is a device used to dehumidifying plastic resin to achieve drying. For example,POM,ABS,TPE,PAL,ABS,CAB,EVA(2),EVOH,LM(4),
LCP,PA11,PA6.46.6,PAI,PAR,PBT,PC,PC/ABS,PC/PBT,PE.HDEPE,LDPE black3%,PE.HDEPE.LDPE black40%,PEEK,PE(1),PEN,PES,PET,PETG,PI,PMMA,POM,PP,PPO,PPS,PS,[GPPS.EPS.HIPS],PSU,PIT,PUR,PVC,SAN,SB,TPE,TPE,TPO,TPU,Dehumidifier dryerand other plastic resins must be dehumidified and dried during the production process to improve the quality of the finished product. Hopper Dryer
Product alias:Plastic Dehumidifying Dryer for PLA,Hopper Dryer,Plastic Dehumidifying Dryer for PLA |
Plastic Dehumidifying Dryer for PLA Precautions
Hopper Dryer 1, please carry out electrical construction in accordance with the "Electrical Equipment Standards", "Inner Line Regulations" and this operating manual.
2, please do not use the power supply other than that specified.
3, please complete the specified grounding project. (Yellow power cord)
4, please fasten the connector and connecting terminal of the machine body and measuring wire.
5, before the line test, the power must be cut off, and the voltage will be measured with a multimeter after 10 minutes to ensure safety before the test.
6, the door of the control box must not be opened at will during the power-on process.
7, it is forbidden to touch the machine body, control part and other accessories with wet hands.
8, please do not damage the wire, do not put pressure on the wire, do not place heavy objects on the wire, and do not pinch the wire. May cause electric shock.
9, wiring and inspection work should be performed by professional technicians.
10, when you need to disassemble the machine for inspection and cleaning, please cut off the power supply and compressed air source first.
Product alias:Plastic Dehumidifying Dryer for PLA,Hopper Dryer,Plastic Dehumidifying Dryer for PLA |
|
|
