| PET dehumidifying dryers Details description |
 |
| product name：PET dehumidifying dryers |
| release time:2020-07-20 |
| Numbering:009 |
| Brand:wtobtb |
| Price:￥By function |
| weight :By function |
| unit weight:Kg/set |
manufacturer:hengju |
| patent:hengju |
| Producing country:china |
simple description:Plastic desiccant dryer、3 in 1 Dehumidifier Dryer pc dehumidification dryer
PE、PC、PP、PVC、PET、TPU、PA、PMMA、PTFE、POM、ABS、TPE,This is a device used to dehumidifying plastic resin to achieve drying.For example,
POM,ABS,TPE,PAL,ABS,CAB,EVA(2),EVOH,LM(4),
LCP,PA11,PA6.46.6,PAI,PAR,PBT,PC,PC/ABS,PC/PBT,
PE.HDEPE,LDPE black3%,PE.HDEPE.LDPE black40%,
PEEK,PE(1), PEN,PES,PET,PETG,PI,PMMA,POM,PP,PPO,
PPS,PS,GPPS.EPS.HIPS,PSU, PIT,PUR,PVC,SAN,SB,TPE,
TPE,TPO,TPU,Dehumidifier dryerand other plastic resins
must be dehumidified and dried during the production process to improve the quality of the finished product. |
| Product alias:Plastic desiccant dryer、3 in 1 Dehumidifier Dryer PE、PC、PP、PVC、PET、TPU、PA、PMMA、PTFE、POM、ABS、TPE dehumidifying dryer,Hopper Dryer,PET dehumidifying dryers |
|
| PET dehumidifying dryers Product introduction |
|
PET dehumidifying dryers parameter
Hopper Dryer Comparison table of drying capacity of PET plastic desiccant dryer:
| raw material |
Drying temperature (℃) |
Drying time(Hr) |
Specific heat |
Raw material proportion (kg/dm3) |
Drying capacity (kg/hr) |
TAD
-50 |
TAD
-80H |
TAD
-120H |
TAD
-150H |
TAD
-200H |
TAD
-
300H |
TAD
-400H |
TAD
-500H |
TAD
-700H |
- |
- |
- |
| ABS |
80 |
2-3 |
0.34 |
0.6 |
18 |
27 |
35 |
71 |
105 |
180 |
210 |
285 |
355 |
425 |
710 |
1065 |
| CA |
75 |
2-3 |
0.5 |
0.5 |
15 |
22 |
30 |
60 |
90 |
150 |
180 |
235 |
295 |
355 |
590 |
885 |
| CAB |
75 |
2-3 |
0.5 |
0.5 |
15 |
22 |
30 |
60 |
90 |
150 |
180 |
235 |
295 |
355 |
590 |
885 |
| CP |
75 |
2-3 |
0.6 |
0.6 |
18 |
27 |
35 |
71 |
106 |
180 |
210 |
285 |
355 |
425 |
710 |
1060 |
| LCP |
150 |
4 |
0.6 |
0.6 |
13 |
20 |
27 |
55 |
80 |
135 |
160 |
210 |
265 |
320 |
530 |
800 |
| POM |
100 |
2 |
0.35 |
0.6 |
27 |
40 |
53 |
105 |
160 |
265 |
320 |
425 |
530 |
640 |
1060 |
1600 |
| PMMA |
180 |
3 |
0.35 |
0.65 |
19 |
29 |
38 |
77 |
115 |
192 |
230 |
307 |
383 |
460 |
767 |
1150 |
| IONOMER |
190 |
3-4 |
0.55 |
0.5 |
11 |
17 |
22 |
44 |
66 |
111 |
133 |
177 |
220 |
265 |
442 |
663 |
| PA6/6.6/6.10 |
75 |
4-6 |
0.4 |
0.65 |
10 |
14 |
19 |
38 |
58 |
96 |
115 |
153 |
192 |
230 |
383 |
575 |
| PA11 |
75 |
4-5 |
0.58 |
0.65 |
12 |
17 |
23 |
46 |
69 |
115 |
138 |
184 |
230 |
275 |
460 |
690 |
| PA12 |
75 |
4-5 |
0.28 |
0.65 |
12 |
17 |
23 |
46 |
69 |
115 |
138 |
184 |
230 |
275 |
460 |
690 |
| PC |
120 |
2-3 |
0.28 |
0.7 |
21 |
31 |
41 |
83 |
124 |
206 |
250 |
330 |
413 |
495 |
826 |
1238 |
| PU |
90 |
2-3 |
0.45 |
0.65 |
19 |
29 |
38 |
77 |
115 |
190 |
230 |
307 |
383 |
460 |
767 |
1150 |
| PBT |
130 |
3-4 |
0.3-0.5 |
0.7 |
15 |
23 |
31 |
62 |
93 |
155 |
186 |
248 |
310 |
472 |
620 |
930 |
| PE |
90 |
2 |
0.55 |
0.6 |
53 |
80 |
106 |
212 |
318 |
531 |
637 |
850 |
1062 |
1275 |
2125 |
3185 |
| PEI |
150 |
3-4 |
0.6 |
0.6 |
13 |
20 |
27 |
53 |
80 |
133 |
160 |
212 |
265 |
320 |
530 |
800 |
| PET |
160 |
4-6 |
0.3-0.5 |
0.85 |
13 |
19 |
25 |
50 |
75 |
125 |
150 |
200 |
250 |
300 |
500 |
7500 |
| PETG |
70 |
3-4 |
0.6 |
0.6 |
13 |
20 |
27 |
53 |
80 |
133 |
160 |
212 |
265 |
320 |
530 |
800 |
| PEN |
170 |
5 |
0.85 |
0.85 |
15 |
23 |
30 |
60 |
90 |
150 |
180 |
240 |
300 |
360 |
600 |
900 |
| PES |
150 |
4 |
0.7 |
0.7 |
15 |
23 |
30 |
60 |
90 |
150 |
180 |
240 |
300 |
360 |
600 |
900 |
| PMMA |
80 |
3 |
0.65 |
0.65 |
19 |
29 |
38 |
77 |
115 |
190 |
230 |
230 |
385 |
460 |
765 |
1150 |
| PPO |
110 |
1-2 |
0.4 |
0.5 |
22 |
33 |
44 |
88 |
133 |
220 |
265 |
355 |
440 |
530 |
885 |
1330 |
| PPS |
150 |
3-4 |
0.6 |
0.6 |
13 |
20 |
27 |
53 |
80 |
133 |
160 |
212 |
265 |
320 |
530 |
800 |
| PI |
120 |
2 |
0.27 |
0.6 |
27 |
40 |
53 |
105 |
160 |
265 |
320 |
425 |
530 |
640 |
1060 |
1600 |
| PP |
90 |
1 |
0.46 |
0.5 |
44 |
66 |
88 |
180 |
265 |
442 |
530 |
710 |
885 |
1060 |
1770 |
2655 |
| PS(GP) |
80 |
1 |
0.28 |
0.5 |
44 |
66 |
88 |
180 |
265 |
442 |
531 |
708 |
885 |
1060 |
1770 |
2655 |
| PSU |
120 |
3-4 |
0.31 |
0.65 |
14 |
22 |
29 |
60 |
85 |
145 |
173 |
230 |
290 |
345 |
575 |
865 |
| PVC |
70 |
1-2 |
0.2 |
0.5 |
22 |
33 |
44 |
90 |
135 |
220 |
265 |
355 |
442 |
530 |
885 |
1330 |
| SAN(AS) |
80 |
1-2 |
0.32 |
0.5 |
22 |
33 |
44 |
90 |
135 |
220 |
265 |
355 |
442 |
530 |
885 |
1330 |
| TPE |
110 |
3 |
0.7 |
0.7 |
20 |
30 |
40 |
85 |
125 |
205 |
250 |
330 |
413 |
495 |
826 |
1238 |
Product alias:Plastic desiccant dryer、3 in 1 Dehumidifier Dryer PE、PC、PP、PVC、PET、TPU、PA、PMMA、PTFE、POM、ABS、TPE dehumidifying dryer,Hopper Dryer,PET dehumidifying dryers |
PET dehumidifying dryers Equipment principle
Hopper Dryer Why recommend that you use PC plastic desiccant dryer?
Poor molding of plastic products mostly stems from poor dehumidification and drying. The American Plastics Association recommends that the plastic before molding must be dried to a moisture content below 0.02%, with poor transparency, sprue sticking, burrs, bubbles, silver bars, flow marks, cracks, poor dimensional stability, internal stress, Insufficient product strength and other shortcomings, most of the reasons for poor performance are that the plastic is fully dehumidified and dried before molding. Especially high water-impregnable plastics such as PET, PBT, PA, PC, etc. require ultra-low dew point Dew point-40℃ drying equipment.
plastic Dehumidification dryer/PE Dehumidification dryer、PET Dehumidification dryer、PP Dehumidification dryer、PVC Dehumidification dryer
Product alias:Plastic desiccant dryer、3 in 1 Dehumidifier Dryer PE、PC、PP、PVC、PET、TPU、PA、PMMA、PTFE、POM、ABS、TPE dehumidifying dryer,Hopper Dryer,PET dehumidifying dryers |
PET dehumidifying dryers application
This is a device used to dehumidifying plastic resin to achieve drying. For example,POM,ABS,TPE,PAL,ABS,CAB,EVA(2),EVOH,LM(4),
LCP,PA11,PA6.46.6,PAI,PAR,PBT,PC,PC/ABS,PC/PBT,PE.HDEPE,LDPE black3%,PE.HDEPE.LDPE black40%,PEEK,PE(1),PEN,PES,PET,PETG,PI,PMMA,POM,PP,PPO,PPS,PS,[GPPS.EPS.HIPS],PSU,PIT,PUR,PVC,SAN,SB,TPE,TPE,TPO,TPU,Dehumidifier dryerand other plastic resins must be dehumidified and dried during the production process to improve the quality of the finished product.Application industry of PET plastic desiccant dryer:1. Films and sheets: all kinds of food, medicine, non-toxic, sterile packaging materials; textiles, precision instruments, high-end packaging materials for electrical components; audio tapes, video tapes, movie films, computer floppy disks, metal coatings and photosensitive films Other substrates; electrical insulating materials, capacitor films, flexible printed circuit boards and membrane switches, and other electronic and mechanical fields.
2. The application of packaging bottles: its application has developed from the initial carbonated beverages to the current beer bottles, edible oil bottles, seasoning bottles, medicine bottles, cosmetic bottles, etc.
3. Electronic appliances: manufacturing connectors, coil frames, integrated circuit cases, capacitor cases, transformer cases, TV accessories, tuners, switches, timer cases, automatic fuses, motor brackets and relays.
4. Auto parts: such as switchboard cover, ignition coil, various valves, exhaust parts, distributor cover, measuring instrument cover, small motor cover, etc. The excellent paintability, surface gloss and stiffness of PET can also be used. Manufacture of exterior parts of automobiles.
5. Mechanical equipment: manufacture gears, cams, pump casings, pulleys, motor frames and watch parts, and can also be used as microwave oven bakeware, various ceilings, outdoor billboards and models, etc.
6. The molding process of PET plastic can be injection molding, extrusion, blow molding, coating, bonding, mechanical processing, electroplating, vacuum metal plating and printing. Hopper Dryer
Product alias:Plastic desiccant dryer、3 in 1 Dehumidifier Dryer PE、PC、PP、PVC、PET、TPU、PA、PMMA、PTFE、POM、ABS、TPE dehumidifying dryer,Hopper Dryer,PET dehumidifying dryers |
PET dehumidifying dryers Precautions
Hopper Dryer 1. Pay attention to the place where it is placed and used, and don't use it in a confined and narrow space. If there are objects or walls around, keep a distance of more than 50 cm. And do not use it in a place with a lot of oily smoke, otherwise it may cause loss of heat exchanger function.
2. The indoor temperature suitable for the dehumidification dryer is at a room temperature of about 12°C to 35°C. The function of the dehumidifier is the best time it can perform. If the room temperature is lower than 12°C, the humidity in the air is usually very low. In order to avoid excessive dryness and cause physical discomfort, it is recommended that you do not use a dehumidifier.
3. To clean the body of the PET dehumidifier dryer, when dealing with the cleaning problem of the industrial dehumidifier, you must use a neutral detergent, or directly wipe the dehumidifier with a soft wet cloth. Causes varying degrees of damage to the body.
4. Do not restart the PET dehumidification and drying machine immediately after shutting down. After stopping the operation, you must wait three minutes before restarting, so as to extend the service life of the compressor. The current new dehumidifier has a self-protection function, so if you press the start button immediately after shutting down, it may not work. This is normal.
Product alias:Plastic desiccant dryer、3 in 1 Dehumidifier Dryer PE、PC、PP、PVC、PET、TPU、PA、PMMA、PTFE、POM、ABS、TPE dehumidifying dryer,Hopper Dryer,PET dehumidifying dryers |
|
|
