| PET drying system Details description |
 |
| product name：PET drying system |
| release time:2020-09-04 |
| Numbering:HCF-400400 |
| Brand:wtobtb |
| Price:￥Various |
| weight :600 |
| unit weight:kg |
manufacturer:HENGJU |
| patent:Drying Control |
| Producing country:CHINA |
| simple description:Dehumidifying dryer for plastic material,This is a device used to dehumidifying plastic resin to achieve drying.For example,
POM,ABS,TPE,PAL,ABS,CAB,EVA(2),EVOH,LM(4),
LCP,PA11,PA6.46.6,PAI,PAR,PBT,PC,PC/ABS,PC/PBT,
PE.HDEPE,LDPE black3%,PE.HDEPE.LDPE black40%,
PEEK,PE(1), PEN,PES,PET,PETG,PI,PMMA,POM,PP,PPO,
PPS,PS,GPPS.EPS.HIPS,PSU, PIT,PUR,PVC,SAN,SB,TPE,
TPE,TPO,TPU,Dehumidifier dryerand other plastic resins
must be dehumidified and dried during the production process to improve the quality of the finished product. |
| Product alias:PET drying system,Hopper Dryer,PET drying system |
|
| PET drying system Product introduction |
|
PET drying system parameter
Hopper Dryer
| Model |
HCF-400 400 |
| Dryer Hopper |
Capacity (KG) |
400 |
| Heat Protection Material |
Fiberglass+Staninless Steel |
| Dry-Air Dew point |
-35℃ to -45℃ |
| Temperature (℃) |
80-180 |
| Air Flow (m^3/h) |
400 |
| Blower Power (KW) |
5.5 |
| Regeneration Blower (KW) |
0.75 |
| Drying Heater (KW) |
20 |
| Regeneration Heater (KW) |
7.2 |
| Pipe Sizes |
Drying (mn) |
76 |
| Cooling (lnch) |
3/4" |
| Regeneration (mn) |
51 |
| Conveying Blower (KW) |
2 |
| Conveying Distance (m) |
Stage 1 |
6-10 |
| Stage 2 |
6-10 |
| Hose Size (Inch) |
1.5 |
| Sensor Hopper Capacity (L) |
7.5 |
| Vacuum Hopper Capacity (L) |
7.5 |
| Dimension LxWxH (cm) |
150×130×280 |
| Approx.Net Weight (KG) |
600 |
| |
|
|
Remark: Compressed air Pressure must more than 0.4MPa,air flow more than 15L/H;
We reserve the right to change spencifications without prior notice. |
Product alias:PET drying system,Hopper Dryer,PET drying system |
PET drying system Equipment principle
Hopper Dryer 
Product alias:PET drying system,Hopper Dryer,PET drying system |
PET drying system application
This is a device used to dehumidifying plastic resin to achieve drying. For example,POM,ABS,TPE,PAL,ABS,CAB,EVA(2),EVOH,LM(4),
LCP,PA11,PA6.46.6,PAI,PAR,PBT,PC,PC/ABS,PC/PBT,PE.HDEPE,LDPE black3%,PE.HDEPE.LDPE black40%,PEEK,PE(1),PEN,PES,PET,PETG,PI,PMMA,POM,PP,PPO,PPS,PS,[GPPS.EPS.HIPS],PSU,PIT,PUR,PVC,SAN,SB,TPE,TPE,TPO,TPU,Dehumidifier dryerand other plastic resins must be dehumidified and dried during the production process to improve the quality of the finished product. Hopper Dryer
Product alias:PET drying system,Hopper Dryer,PET drying system |
PET drying system Precautions
Hopper Dryer 1, please carry out electrical construction in accordance with the "Electrical Equipment Standards", "Inner Line Regulations" and this operating manual.
2, please do not use the power supply other than that specified.
3, please complete the specified grounding project. (Yellow power cord)
4, please fasten the connector and connecting terminal of the machine body and measuring wire.
5, before the line test, the power must be cut off, and the voltage will be measured with a multimeter after 10 minutes to ensure safety before the test.
6, the door of the control box must not be opened at will during the power-on process.
7, it is forbidden to touch the machine body, control part and other accessories with wet hands.
Product alias:PET drying system,Hopper Dryer,PET drying system |
|
|
