| Drying Unit Details description |
 |
| product name：Drying Unit |
| release time:2020-09-04 |
| Numbering:HCF-300300 |
| Brand:wtobtb |
| Price:￥Various |
| weight :550 |
| unit weight:KG |
manufacturer:HENGJU |
| patent:Drying Control |
| Producing country:CHINA |
simple description:The 3-in-1 machine's integrated design ensures that the raw materials are dried in a completely closed system, avoiding the re-moisture of the dried raw materials due to contact with the outside air to achieve a good drying effect.
,This is a device used to dehumidifying plastic resin to achieve drying.For example,
POM,ABS,TPE,PAL,ABS,CAB,EVA(2),EVOH,LM(4),
LCP,PA11,PA6.46.6,PAI,PAR,PBT,PC,PC/ABS,PC/PBT,
PE.HDEPE,LDPE black3%,PE.HDEPE.LDPE black40%,
PEEK,PE(1), PEN,PES,PET,PETG,PI,PMMA,POM,PP,PPO,
PPS,PS,GPPS.EPS.HIPS,PSU, PIT,PUR,PVC,SAN,SB,TPE,
TPE,TPO,TPU,Dehumidifier dryerand other plastic resins
must be dehumidified and dried during the production process to improve the quality of the finished product. |
| Product alias:Drying Unit,Hopper Dryer,Drying Unit |
|
| Drying Unit Product introduction |
|
Drying Unit parameter
Hopper Dryer
| Model |
HCF-300300 |
| Dryer Hopper |
Capacity (KG) |
300 |
| Heat Protection Material |
Fiberglass+Staninless Steel |
| Dry-Air Dew point |
-35℃ to -45℃ |
| Temperature (℃) |
80-180 |
| Air Flow (m^3/h) |
300 |
| Blower Power (KW) |
3.8 |
| Regeneration Blower (KW) |
0.75 |
| Drying Heater (KW) |
18 |
| Regeneration Heater (KW) |
7.2 |
| Pipe Sizes |
Drying (mn) |
63 |
| Cooling (lnch) |
3/4" |
| Regeneration (mn) |
51 |
| Conveying Blower (KW) |
2 |
| Conveying Distance (m) |
Stage 1 |
6-10 |
| Stage 2 |
6-10 |
| Hose Size (Inch) |
1.5 |
| Sensor Hopper Capacity (L) |
7.5 |
| Vacuum Hopper Capacity (L) |
7.5 |
| Dimension LxWxH (cm) |
165×130×225 |
| Approx.Net Weight (KG) |
550 |
| |
|
|
Remark: Compressed air Pressure must more than 0.4MPa,air flow more than 15L/H;
We reserve the right to change spencifications without prior notice. |
Product alias:Drying Unit,Hopper Dryer,Drying Unit |
Drying Unit Equipment principle
Hopper Dryer 
Product alias:Drying Unit,Hopper Dryer,Drying Unit |
Drying Unit application
This is a device used to dehumidifying plastic resin to achieve drying. For example,POM,ABS,TPE,PAL,ABS,CAB,EVA(2),EVOH,LM(4),
LCP,PA11,PA6.46.6,PAI,PAR,PBT,PC,PC/ABS,PC/PBT,PE.HDEPE,LDPE black3%,PE.HDEPE.LDPE black40%,PEEK,PE(1),PEN,PES,PET,PETG,PI,PMMA,POM,PP,PPO,PPS,PS,[GPPS.EPS.HIPS],PSU,PIT,PUR,PVC,SAN,SB,TPE,TPE,TPO,TPU,Dehumidifier dryerand other plastic resins must be dehumidified and dried during the production process to improve the quality of the finished product.In the production process of plastic products, the moisture problem bothers all processors. The rotary dehumidifier is widely used for drying all kinds of plastics, especially engineering plastics with strong hygroscopicity (such as PA, PC, PBT, PET, etc.) for high-efficiency dehumidification.
 Hopper Dryer
Product alias:Drying Unit,Hopper Dryer,Drying Unit |
Drying Unit Precautions
Hopper Dryer 1, please carry out electrical construction in accordance with the "Electrical Equipment Standards", "Inner Line Regulations" and this operating manual.
2, please do not use the power supply other than that specified.
3, please complete the specified grounding project. (Yellow power cord)
4, please fasten the connector and connecting terminal of the machine body and measuring wire.
5, before the line test, the power must be cut off, and the voltage will be measured with a multimeter after 10 minutes to ensure safety before the test.
6, the door of the control box must not be opened at will during the power-on process.
Product alias:Drying Unit,Hopper Dryer,Drying Unit |
|
|
