Central feeding system central conveying system

Central feeding system| RSS

central feeding system

Technology

Design diagram

Video

Accessories

Industry Application

Cost budget

Equipment

application solutions

About us

Welcome to join the central feeding system website (central feeding system is also called central feeding system, automatic feeding system, centralized feeding system, central conveyor system)! This is a global central feeding system manufacturer, providing a more comprehensive central feeding system information exchange platform website for machinery and equipment products, technology, design, cost budget, entire factory planning, solutions, etc.! Feasible design solutions can reduce more costs for enterprises!

STANDARD OIL TEMPERATURE CONTROLLER

  STANDARD OIL TEMPERATURE CONTROLLER Details description
product name:STANDARD OIL TEMPERATURE CONTROLLER
release time:2020-08-27
Numbering:018
Brand:HENGJU
Price:¥discuss personally
weight :45
unit weight:kg
manufacturer:HENGJU
patent:YES
Producing country:CHINA
simple description:It is widely used in home appliances, automobiles, communications, daily necessities and other industries, such as TV sets, computers, mobile phones, air conditioners, automotive interior accessories, headlights and optics, OA, AV instruments and other industries
Product alias:STANDARD OIL TEMPERATURE CONTROLLER
  STANDARD OIL TEMPERATURE CONTROLLER Product introduction

STANDARD OIL TEMPERATURE CONTROLLER parameter


Product alias:STANDARD OIL TEMPERATURE CONTROLLER

STANDARD OIL TEMPERATURE CONTROLLER Equipment principle

 Working principle:
The oil temperature machine itself is provided with an oil storage tank. During operation, the thermal oil enters the system from the oil storage tank and is driven into the mold or other equipment requiring temperature control by circulating pump. After the thermal oil comes out from the controlled

temperature equipment, it returns to the system again and again.The heat conduction oil heats up through the heater. When the media temperature detected by the temperature sensor probe reaches the set value, the heater stops working.When the temperature is lower than the


set value, the heater will start to work, and when the temperature reaches the set value, it will stop working.And so on.
 

Product alias:STANDARD OIL TEMPERATURE CONTROLLER

STANDARD OIL TEMPERATURE CONTROLLER application

 Features:
1.P.I.D temperature control with deviation ±0.1℃, long constant temperature time, with high efficiency and energy saving.
2. Six protective functions: auto-exhaust starting up, auto-cooling shutting down, thermalcouple broken alarm, power phase shortage, out-phase protection,  water-pump protection, over-heating protection and oil shortage protection etc.
3.LCD shows the actual and set temperatures--direct and visual operations.


4.Visual and easy operations,easy to maintain.
5.Stainless steel tank--durable without leakage or rust.
6.Circumfluence design enables recollection of diathermanous oil,easily and rapidly.
7.Exquisite appearance with delicate size.
 

Product alias:STANDARD OIL TEMPERATURE CONTROLLER

STANDARD OIL TEMPERATURE CONTROLLER Precautions

Usage and Precautions:
1. Please check the cooling water circulation before use to prevent damage to the mold temperature machine due to insufficient cooling water.
We must keep the working environment of the mold temperature machine clean from dust, which can greatly extend the service life of the electrical components.
2. For new MTC, we need to make different maintenance measures according to the heat conduction medium.
If the medium is water, we must keep the water source clean, so that it is not easy to scale, and it can also prevent the pipeline from being blocked.
For oil medium, we need to replace it regularly according to the use temperature. For the temperature above 200 ℃, we need to replace it once a month or two, and below 200 ℃, we can replace it once a quarter or so, which is very good It avoids the problem that the temperature cannot be increased.
3. As for pipeline, we should judge whether the pipeline is blocked according to the connection between pump and pressure. If the pressure is too low, we can take out the heating pipe and clean it with tools, especially the filter mesh at the entrance of the system.
 It is best to clean the hood once a month.
4. Regularly check the mold temperature machine water pump and oil pump for oil leakage. If necessary, the pump shaft seal can also be replaced regularly.
5. On electrical components, we can replace them in time according to the service life of the components and test them regularly to ensure safety.
 

Product alias:STANDARD OIL TEMPERATURE CONTROLLER

Central feeding system

centralized conveying system

central material feeding system

Dehumidification dryer gravimetric blender plastic granules mixing machine
Plastic dehumidifying dryer gravimetric blender plastic granules mixing machine
Links:  google plastic dryer Dehumidifying Dryer gravimetric blender Central feeding system