Central feeding system central conveying system

Central feeding system| RSS

central feeding system

Technology

Design diagram

Video

Accessories

Industry Application

Cost budget

Equipment

application solutions

About us

Welcome to join the central feeding system website (central feeding system is also called central feeding system, automatic feeding system, centralized feeding system, central conveyor system)! This is a global central feeding system manufacturer, providing a more comprehensive central feeding system information exchange platform website for machinery and equipment products, technology, design, cost budget, entire factory planning, solutions, etc.! Feasible design solutions can reduce more costs for enterprises!

STANDARD WATER TEMPERATURE CONTROLLER

  STANDARD WATER TEMPERATURE CONTROLLER Details description
product name:STANDARD WATER TEMPERATURE CONTROLLER
release time:2020-08-26
Numbering:016
Brand:HENGJU
Price:¥discuss personally
weight :45
unit weight:kg
manufacturer:HENGJU
patent:YES
Producing country:CHINA
simple description:Mold temperature controller is widely used in plastic production industry. And by using MTC, customers can get:
1.Improve the molding efficiency of the product;
2. Reduce the production of defective products;
3. Improve the appearance of the product and suppress the defects of the product;
4. Speed up production progress, reduce energy consumption and save energy.
Product alias: WATER TEMPERATURE CONTROLLER
  STANDARD WATER TEMPERATURE CONTROLLER Product introduction

STANDARD WATER TEMPERATURE CONTROLLER parameter

 
Product alias: WATER TEMPERATURE CONTROLLER

STANDARD WATER TEMPERATURE CONTROLLER Equipment principle

 Working principle:
Water type mold temperature machine is mainly composed of circulating pump, heater, cooler, temperature sensor, temperature controller and electrical control system.Working principle: After the circulation pipe is filled with water, the water-type mold temperature machine can start to work

normally.The circulating pump drives the water through the heater and cooler, into the client device, back to the circulating pump, and so on.The temperature sensor detects the outlet temperature of the mold temperature machine. The thermostat outputs heating and cooling signals to control the operation of the heater and cooler, so as to maintain the constant temperature of water.
 

Product alias: WATER TEMPERATURE CONTROLLER

STANDARD WATER TEMPERATURE CONTROLLER application

 Features:
1.P.I.D temperature control with deviation ±0.1℃, long constant temperature time, with high efficiency and energy saving.
2. Six protective functions: auto-exhaust starting up, auto-cooling shutting down, thermalcouple broken alarm, power phase shortage, out-phase protection, water-pump protection, over-heating protection and oil shortage protection etc.
3.LCD shows the actual and set temperatures--direct and visual operations.
4.Visual and easy operations,easy to maintain.
5.Stainless steel tank--durable without leakage or rust.
6.Exquisite appearance with delicate size.
 

Product alias: WATER TEMPERATURE CONTROLLER

STANDARD WATER TEMPERATURE CONTROLLER Precautions

 Usage and Precautions:
1. Please check the cooling water circulation before use to prevent damage to the mold temperature machine due to insufficient cooling water.
We must keep the working environment of the mold temperature machine clean from dust, which can greatly extend the service life of the electrical components.
2. For new MTC, we need to make different maintenance measures according to the heat conduction medium.
If the medium is water, we must keep the water source clean, so that it is not easy to scale, and it can also prevent the pipeline from being blocked.
For oil medium, we need to replace it regularly according to the use temperature. For the temperature above 200 ℃, we need to replace it once a month or two, and below 200 ℃, we can replace it once a quarter or so, which is very good It avoids the problem that the temperature cannot be increased.
3. As for pipeline, we should judge whether the pipeline is blocked according to the connection between pump and pressure. If the pressure is too low, we can take out the heating pipe and clean it with tools, especially the filter mesh at the entrance of the system.
 It is best to clean the hood once a month.
4. Regularly check the mold temperature machine water pump and oil pump for oil leakage. If necessary, the pump shaft seal can also be replaced regularly.
5. On electrical components, we can replace them in time according to the service life of the components and test them regularly to ensure safety.
 

Product alias: WATER TEMPERATURE CONTROLLER

Central feeding system

centralized conveying system

central material feeding system

Dehumidification dryer gravimetric blender plastic granules mixing machine
Plastic dehumidifying dryer gravimetric blender plastic granules mixing machine
Links:  google plastic dryer Dehumidifying Dryer gravimetric blender Central feeding system